Successful seeding with Kverneland e-drill
How to optimise seeding for an even field emergence and high yields
Modern farming faced with very tight margins leaves no room for compromise. Narrow seeding windows, variable soil conditions, and rising input costs demand one thing above all: precise seed placement. And this at the right time, universal in almost all conditions and in one pass.
With the power harrow mounted seed drill seeding combination, Kverneland e-drill, you achieve perfect seed placement in every pass, combining intelligent metering with advanced and proven coulter technology.
Easy calibration and exact seed metering with the ELDOS metering device
ELDOS is the electric driven metering device for Kverneland pneumatic seed drills. It is the state-of-the-art technology for perfect seed placement of all sorts of seeds. ELDOS delivers highly accurate seed placement, seamless automation, and complete operator control. Driven by the intelligent e-com or e-bas software platforms, ELDOS combines advanced electronics with fail-safe monitoring to ensure optimal performance in every field condition. With ISOBUS compatibility, automatic section control via GEOCONTROL, and variable-rate seeding through application maps, ELDOS minimizes overlaps and missed areas while maximizing crop uniformity and yield potential. Automatic calibration, tool-free rotor exchange, and integrated sensor monitoring make the system both efficient and reliable, giving farmers smarter seeding technology with complete confidence from the tractor cab.
In brief, the ELDOS electric metering system ensures every seed is delivered at the exact seed rate.
See how ELDOS works
Why ELDOS makes the difference
Easy and free access by lateral position
The patented lateral position of the ELDOS metering device ensures ergonomic and easy access at an ideal working height, without bending, kneeling, or climbing. Rotors and the calibration kit are stored in a dust-protected toolbox within easy reach.
Accurate application of wide application range
Five standard rotors are delivered: for fine and large seeds as well as for fertiliser.
Application rate from 1 – 400 kg/ha is possible, depending on working speed and width.
Easy handling for operators comfort
The rotor-based metering system ensures precise seed rates and consistent output across the full working width. Rotors can be exchanged quickly without tools, while the automatic rotor recognition and shut-off flap help to prevent misuse.
Precision you can measure. Reliability you can trust.
Fast, automatic calibration - less error
With ELDOS, the calibration is very easy. Just enter the desired values into the terminal, press the button to start at the metering device and the calibration is done automatically. It is a safe process by automatic rotor recognition and adapted rotor rpm.
Real-time monitoring from the tractor cab
With the Kverneland terminals Tellus 700 and Tellus 1200, Kverneland simplifies precision farming with smart features, custom mapping, and user-friendly design. It delivers all-in-one control beyond standard tractor systems. You have the choice between the Tellus 700 single-screen terminal and the Tellus 1200, offering more options across multiple screens.
Smart Farming, ISOBUS COMPATIBLE
With GPS and an application map, the e-drill automatically adjusts seed rates variable based on pre-defined zones. In combination with the electrically driven metering unit ELDOS, the system ensures precise seeding across varying field conditions. When the seeder enters a designated zone, the seed rate is automatically adapted for that area – increasing efficiency and saving inputs.
Perfect seed placement with CX-II coulter technology
Uniform emergence depends on consistent depth and seed-to-soil contact. The CX-II coulter system delivers both, no matter the conditions.
The CX‑II coulters, available with or without a press wheel, guarantee precise seed placement, require low pulling and penetration force, and when equipped with press wheels, allow individual depth adjustment for each coulter. This enables to establish e.g. companion crops where every seed needs its specific sowing depth. Row spacing can be selected according to crop establishment and crop‑care requirements and can also be later adapted by retro-fit kits to meet future needs.
The benefits of the CX-II coulter in brief:
- The CX-II disc coulter from Kverneland not only guarantees smoother running but also exact seed placement
- The flatter cutting angle of only 5.4° of the steel disc requires less pulling power to reach a constant seeding depth of up to 6cm.
- Due to the combination of the steel disc with a diameter of 325mm and the flexible plastic disc, there is no need for independent scrapers, saving the cost for expensive wearing parts. In addition the coulter is completely maintenance-free!
- Up to 50kg coulter pressure can be achieved by a pre-loaded spring. Safe operation is ensured when working with high working speeds and high quantities of plant residues on the soil surface.
- Maximum flexibility is achieved by the clamped coulter which allows to adjust the row spacing according to the farming system and can also be changed to future requirements.
- An inter-row coulter spacing of 445mm for maximum clearance and the following press wheel (standard equipment) ensure an optimum seed/soil contact in all conditions.The CX-II coulter is also available as light edition without press wheel which reduces the weight and length of the coulterbar. This will allow to operate the seeding combination also with lower lifting capacity of the tractor. On slightly sticky soils, an optional scraper is recommeded.
- The press wheels can be set in fixed, floating of lifted position in order to be able to adapt quickly to changing weather, soil or working conditions. For a levelled, even ground the fixed position is recommended. In cloddy or stony conditions, the floating set ensures smooth running. Finally, in extreme wet conditions, the press wheel can be lifted out of work completely.
A consistent seed depth by CX-II coulter. Any obstacle in the field is a challenge for an even seeding depth. The wider the distance between the coulter and the press wheel, the more influence it has on seed depth accuracy. The close coupling of the CX-II reduces this effect.
Frequently Asked Questions
How does the Kverneland e-drill improve seed placement accuracy?
The Kverneland e-drill optimises seed placement by precise seed metering, consistent sowing depth control and accurate seed deposit
What are the benefits of the CX-II coulter system?
The CX-II coulter system ensures uniform seeding depth, excellent seed-to-soil contact, and reliable emergence in varying soil conditions.
Is the Kverneland e-drill ISOBUS compatible?
Yes, the e-com version is fully ISOBUS compatible and supports GPS GEOCONTROL to reduce overlaps and optimise inputs. An even crop establishment is achieved by using application maps for variable rate seeding.
Can the Kverneland e-drill handle different seed types?
Yes, the ELDOS metering system supports fine seeds, large seeds, and fertiliser with accurate application rates from 1–400 kg/ha. depending on working speed and width.
Why is consistent seed emergence important?
Consistent seed emergence helps crops establish evenly, improving growth uniformity, field performance, and yield potential.
What is a power harrow seed drill combination?
A power harrow seed drill combination prepares the seedbed and places seed in one pass, saving time and improving field efficiency.
How does GPS GEOCONTROL help during seeding?
GPS GEOCONTROL helps avoid double seeding on headlands and overlaps, reducing seed waste and improving input efficiency. By the automatic section control, GEOCONTROL, the metering device stops/starts automatically. Special
sensors ensure complete functionality from the tractor cab
Can the e-drill be used for companion cropping?
Yes, the model e-drill maxi plus can place two different seeds at specific depths, supporting companion cropping and flexible crop establishment.
Ready to improve your seeding performance?
e-drill
Pneumatic Mounted Seed Drill
Integrated power harrow mounted seed drill, 3.0m to 4.0m
e-drill maxi plus
Pneumatic Mounted Seed Drill
Power-harrow mounted drill for combined seed & fertiliser application..
Kverneland combination provides simple and accurate seeding
Looking to update his 3m i-drill, Perthshire grower Andy Orr from Brunty Farm, Blairgowrie, opted for a Kverneland e-drill, mounted seed drill, with CXI...