SelfLine 4.0 Compact

Unique design makes the difference!
The SelfLine 4.0 Compact models are designed for highest efficiency with a “three point chassis”, perfectly adapted to self-propelled feed mixer demands. For compact design with maximum mixer capacity the hopper is placed in between the axles, while the narrow track of the rear wheels avoids running over discharged feed. Rear steering makes the complete system most suitable for ranking at the silage bunker when loading, also providing most manoeuvrability for tight farm space. The low entrance of the high-end comfort drivers cab provides a good work environment at its highest level.

The Advantages:

  • 12-13m³ versions with 1 auger
  • 16m³ versions with 2 augers
  • Volvo 4-cylinder engine (emissions stage IV) with a capacity of 5.1 litres.
  • Low fuel consumption
  • Manoeuvrability and flexibility around the farm
  • Deluxe cab for operator comfort

 

Technical Specifications:

SelfLine 4.0 Compact Engine Length Width Height
12m³ 143 to 218 hp (105 - 160 kw)  7.53m 2.55m 2.56m
13m³ 143 to 218 hp (105 - 160 kw) 7.53m 2.55m 2.65m
16m³ 143 to 218 hp (105 - 106 kw) 8.64m 2.55m 2.66m
Video
Animation


Prestige 1612 Turbo Auger

  • Auger height is adjusted to hopper height for the perfect auger-hopper ratio.
  • Generously dimensioned Turbo auger with slow revolution for gentle mix at low power requirements.
  • Additional wings on the auger add to a rapid and thorough mixing action.
  • Optional magnet available for removing foreign iron particles from the feed
  • For longer durability Siloking Kverneland has developed SILONOX lining as an option for the mixing augers and hopper walls, where most wearing occurs
2010_07_08_SILOKINGSelbstfahrer
Prestige 1612 Turbo Auger
Prestige 1612 Turbo Auger
Prestige 1612 Turbo Auger
Prestige 1612 Turbo Auger
Prestige 1612 Turbo Auger
Prestige 1612 Turbo Auger
SILONOX
SILONOX
SILONOX

The Milling Head

  • The 2m wide milling head is designed to manage the flow of feed material as fast and as gently as possible.
  • The tungsten carbid knives are specially shaped to collect feed as efficiently as possible.
  • Each knife has a proven long life– but is also reversible to extend the life even further.
  • Immediately behind the knives are specially designed shovels, which gently move the feed to the centre of the milling head and onto the loading conveyer, transporting the feed into the mixing chamber
KV_Prestige_0007.jpg
The Milling Head
The Milling Head
The Milling Head
The Milling Head
The Milling Head
The Milling Head
The Milling Head
The Milling Head

Comfort Cabin

  • The carefully designed controls are all within easy reach of the comfortable suspended seat.
  • The multifunction joystick provides most of the controls for loading and discharge.
  • The cabin position and the extended windscreen ensure a clear view of the loading process – the milling head is clearly visible from the highest to the lowest position.
  • Heated mirrors, good air circulation inside the cabin and large wipers help to maintain maximum visibility from the cabin – even when the difference in temperature inside and out is significant.
  • Cabin heater re-circulates the air from the bottom – ensures clear windscreen (and warm feet!)
  • The suspended seat also makes even the longer daily tasks pleasant and comfortable.
KV_Prestige Comfort Cabin
Comfort Cabin
Comfort Cabin
Comfort Cabin
Comfort Cabin
Comfort Cabin
Comfort Cabin
Comfort Cabin
Comfort Cabin

Manoeuvrability

  • The Prestige range of self-propelled mixers feature a unique three -point chassis – the steering rear wheel ensuring the machine turns about the front axle.
  • This is an ideal solution in small buildings and farms with limited space or access.
  • Rear wheel steering offers the smallest possible turning circle, plus the ultimate control of machine position during loading and discharge. This is particularly important to ensure that feed is discharged in the correct place and to reduce losses during loading.
  • For example – ultimate steering control ensures the machine can be positioned so that the milling head can collect material even from the edge of the silo.
  • This means reduced manual work and reduced material loss.
  • Small silos, low building entrances, low cattle sheds, even narrow feed passages are no problem for the Prestige range of self-propelled feed mixers.
KV_Prestige_01
Manoeuvrability
Manoeuvrability
Manoeuvrability
Manoeuvrability
Manoeuvrability
Manoeuvrability

Discharge Options

  • The unique three-point chassis design avoids running over the feed.
  • various discharge options:
    • Simultaneous discharge at either side
    • Foldable discharge conveyor for direct feeding into high throughs
    • Optional discharge door at front.
  • Easily operated from the cab.

 

KV_Prestige Discharge
Discharge Options
Discharge Options
Discharge Options
Discharge Options
Discharge Options
Discharge Options
Discharge Options
Discharge Options

Powerful Driveline

  • The new common rail SCR engine technology ensures that the Prestige mixers match the latest standards.
  • Performance of the driveline is matched exactly to the capacity of milling head and mixing unit.
  • The engine is positioned strategically at the centre of the mixer, close to both milling head and mixing unit, to ensure the most efficient power distribution.
  • Simple maintenance with easy access to the engine compartment.
  • Professional air filter system.
KV_Prestige SCR Engine
Powerful Driveline
Powerful Driveline
Powerful Driveline
Powerful Driveline
Powerful Driveline
Powerful Driveline
Powerful Driveline
Powerful Driveline

Do you require more info?