Kverneland XHD Tungsten carbide reinforced plough parts impress

Caythorpe, Lincs-based GR Ward relies on its 10-furrow Kverneland RW plough on the frontline of cultivations. 

Kverneland XHD Tungsten carbide reinforced plough parts impress

Caythorpe, Lincs-based GR Ward relies on its 10-furrow Kverneland RW plough on the frontline of cultivations. Each season, it turns over around 1,000ha of the farm’s limestone-based abrasive soils, which puts the emphasis on making the most of wearing metal.

GR Ward_7980

“We’ve always favoured original parts from our local Kverneland dealer, and knock-on points have saved us a fortune in downtime,” explains farms manager Dan Oldershaw-Glenn. “We can be turning points every day, though it’s a quick and pain-free process.”

Constantly looking for ways to reduce downtime and maintain productivity, the farm has been bench-marking the latest XHD carbide reinforced points on the first furrow of its RW plough.

“We wanted to see how long a set of XHD plough parts will last, compared to original metal,” he says. “So we decided to equip one left- and one right-hand body with tungsten and compare it to the rest of the plough,” he says. “So far, the results have been impressive.”

G R Ward 1

Operator Peter Dickinson (left) and manager Dan Oldershaw-Glenn are pleased with the longevity of XHD parts.

The plough is equipped with XHD parts for its points, shins, shares, landsides and skimmer shares. And ploughman Peter Dickinson has been recording progress, comparing the rest of the plough metal to the XHD-equipped front furrow.

Over 750ha, the plough has required 11 sets of original points, plus four sets of point holders, four sets of shins and four sets of shares, and one set of landsides. The XHD skimmer shares were a late addition, and have so far outlasted three sets of original skimmer shares.

GR Ward_XHD_0421

XHD parts have been fitted to the front furrow of this 10-furrow plough, to compare wear rates with original metal.

“So far, the XHD parts show little signs of wear, and could last the equivalent of 20 sets of original points,” says Peter Dickinson. “It’s standing up very well indeed.”

Getting the balance between cost and time is an element that Dan Oldershaw-Glenn is keen to get right.

“There’s no getting away from the high cost of buying XHD, and on a big plough, it becomes a considerable investment,” says Dan. “But so is the cost of labour and lost productivity when swapping metal.”

“We could soon lose a week’s ploughing over a season, just on time spent replacing wearing metal,” he says. “And when you’re covering 60 acres/day, that’s a level of productivity I would be happy to have back.”

GR Ward_0454

Plough data: 10-furrow RW (6+4) Variomat, shearbolt protection, No.28 bodies, knock-on points

Do you require more info?