The tasks of modern soil preparation are multifunctional. Additionally farmers have to meet their specific needs which are predetermined by location and farming practices.
The equipment possibilities of the Kverneland CTC are as versatile as your demands, with a choice of different implement combinations and variants Kverneland offer the possibility to equip the CTC to meet your individual needs.
The Kverneland CTC offers total flexibility with:
The CTC can be equipped with 3 rows of tines positioned at 270mm spacing or 4 rows positioned at 200mm spacing.
|Model||Working width||No. of tines||Min./Max. HP|
|CTC 427||4.0m||15 (spacing 270mm)||145 / 300|
|CTC 420||4.0m||19 (spacing 200mm)||145 / 300|
|CTC 527||5.0m||17 (spacing 270mm)||175 / 350|
|CTC 520||5.0m||23 (spacing 200mm)||175 / 350|
|CTC 627||6.0m||21 (spacing 270mm)||205 / 400|
|CTC 620||6.0m||29 (spacing 200mm)||205 / 400|
Tines can be combined with a variety of share systems allowing working depths between 5cm and 30cm.
For the CTC 3 rows, Kverneland has developed a front disc system to cut or incorporate crop residues in front of the cultivator tines.
The disc system has a centralized hydraulic depth adjustment with master slave cylinder system and individual rubber disc protection. This overload system allows the disc to follow the ground contour very well.
As the working depth of the disc section is limited to 5cm, the required pulling force is insignificantly low.
Front Mixing Disc (FMD)
The front mixing disc (FMD) option is the ideal equipment that avoid any boiling effect in front of the tines especially with short wheat straw. The FMD system has notched hollow discs which are ideal when working in high amounts of crop residues. The FMD system pre-mixes any straw standing on the top of the stubble to ensure thorough mixing by the stubbling tines for improved incorporation. The adjustment of the pressure can be done on the move from the cab hydraulically.
Front Cutting Disc (FCD)
The FCD system has notched straight discs which are mounted in front of the first row of tines. The FCD system is ideal when working in maize straw for example, where the disc is cutting the straw directly in front of the tines. The straw is cut to improve the flow of material and prevent the machine from blocking.
There is a full range of levelling equipment and rear rollers available for CTC
Combi disc harrow:
Cage roller Ø 550mm - 90 kg/m
Double cage roller Ø 400mm (tube/flat) - 160 kg/m
Actipack Ø 560mm - 220kg/m
Actiring Ø 540mm - 160 kg/m
Actiflex roller Ø 580mm - 160 kg/m