Kverneland cultivator CLC pro

Stubble Cultivator CLC pro
The CLC pro has been especially designed to work with the most powerful tractors. With 240HP maximum for 3.00m and up to 350HP for the 5.00m folding model, the CLC has become the benchmark regarding admissible power. It can, therefore, be combined with any type of roller and accessories which makes it  extremely versatile. This quality to absorb the strongest forces also ensures a very long durability.

The CLC range can be equipped with two types of tines and a wide selection of shares. According to the operation requested and the type of soil, the large choice of following implements allows to carry out all sorts of cultivation: from stubble cultivation at 5cm to deep loosening at 30cm working depth.

The great versatility of the CLC pro makes it the ideal implement to meet all your requirements.

The Advantages:

  • High Horse power capacity to cope with all conditions and tractor sizes from 90 to 350 hp
  • Universal Cultivator from  3.0 to 5.0m, working 5 to 30cm deep
  • 3 bar frame for optimum mixing and blockage free operation
  • Unique leg design vibrating for intensive effect in the soil but low fuel consumption
  • Wide choice of shares, rear rollers and levelling equipment
  • Intensive mixing of the residues
  • Seedbed finish possible
Model Working width (m) Frame No. of tines Average tine spacing Min./Max. HP
CLC pro 300 3.0 rigid 10 280 120 / 240
CLC pro 350 3.5 rigid 12 280 135 / 270
CLC pro 400 4.0 rigid 14 280 165 / 300
CLC pro 400F 4.0 fold 13 290 185 / 300
CLC pro 450F 4.5 fold 15 290 190 / 325
CLC pro 500F 5.0 fold 17 290 200 / 350
KV_clc pro_0016.jpg
Video
Animation
Kverneland cultivator CLC pro
Kverneland cultivator CLC pro
Kverneland cultivator CLC pro
Kverneland cultivator CLC pro
Kverneland cultivator CLC pro
Kverneland cultivator CLC pro
Kverneland cultivator CLC pro
Kverneland cultivator CLC pro


CLC pro - Strong Frame

  • The frame design and heavy-duty central beam offers in-field durability even under extreme working conditions.
  • The machine offers high underbeam clearance with 870mm to cope with incorporation of high volumes of crop residue.
  • The frames can absorb e.g. 240 hp with 3.00m and up to 350hp for the folding implements with 5.0m.
  • The material used can bear significant loads while staying reliable and light.
  • The weight carried by the tractor is thus reduced and helps saving fuel.
KV_clc pro_0026.jpg

test-CLC pro - Strong Frame

CLC pro folded
CLC pro folded
CLC pro folded
CLC pro Actiring
CLC pro Actiring
CLC pro Actiring

Tines and Shares

  • The unique and robust design of the tines incorporates a specially heat treated hollow “C” profile.
  • The heat treatment is of the same standards as the beams on the Kverneland ploughs.
  • For lighter conditions, Kverneland offer the "C" tine with shearbolt overload protection releasing from 2 tons.
  • The Kverneland "C" tine equipped with the "Auto-reset" leaf spring safety system is the perfect choice for hard and stony conditions.
  • The tine leg can withstand sideway movements of up to 14cm for the CLC pro, CLC pro Classic, CLC pro Cut and to 20cm for the CLC Evo. This means lower stress to the tine holder and frame structure.
  • The "C"-tine system is maintenance-free.

Tines can be combined with a variety of share systems allowing working depths between 5cm and 30cm

  • The "C"-tine: with the standard reversible plough point made of high quality steel for maximum service life. This allows to work at great depths even in stony soil - eliminating plough pans and in this way encouraging natural drainage. 
  • For stubble cultivation the "C" tine can be equipped with 30cm wing shares.
  • New Quantum share 345mm - always in combination with Knock-on® or Tiger carbide point 80mm. It has been designed for use especially in hard soil. The 80mm point combined with the 345mm wing share ensures perfect penetration and complete flat cutting for a homogeneous weed regrowth.
  • Two types of carbide points – 80mm and 150mm Tiger point. The special design ensures progressive and high penetration and requires low pulling force. The special shape of the carbide plate resist against aggressive stony conditions. All points available with Knock-on® deflectors too.
  • Click here for further details on the Knock-on® system. 
KV_tine technology_0012.jpg

test-Tines and Shares

Tines and Shares
Tines and Shares
Tines and Shares
Tines and Shares
Knock-on 80mm
Knock-on 80mm
Knock-on 80mm
Quantum 345
Quantum 345
Quantum 345

Leaf Spring/Vibromat

  • For lighter conditions Kverneland offer the CLC tine with shearbolt overload protection.
  • This version of the CLC tine offers the same high quality as that of the „Auto-reset“ tine, and is releasing from 2 tons.
  • The Kverneland CLC tine equipped with the “Auto-reset“ leaf spring safety system is the perfect choice for hard and stony conditions.
  • The well renowned Kverneland leaf spring protects the tines against overload. The tine starts to release with loads over 640 kg. The release force decreases with the release height to protect the frame against high stress.
  • All pivot points of the CLC tines are manufactured with wear resistant bushes and bolts of the renowned Kverneland quality.
  • Therefore the CLC tine system is maintenance-free.
KV_tine technology_0008.jpg

test-Leaf Spring/Vibromat

Leaf Spring/Vibromat
Leaf Spring/Vibromat

Rear Accessories CLC pro

The CLC pro is the model which can be equipped with the full range of following implements.

Levelling discs:

  • Rubber spring loaded, to follow the ground and protect against stones
  • Border discs as standard adjustable to the soil flow

Combi disc harrow:

  • Combination of a single disc gang with all roller type
  • Intensive mixing at shallow depth

Double disc gang ø 510 mm:

  • Does a good mixing and incorporation
  • Leaves a rough surface with aggregates ready for wintering, interesting at the end of autumn season for preparing spring fields and crops

Cage roller ø 550mm - 90 kg/m

  • 10 bars for a good loading  capacity and operation in wet conditions
  • Effective crumbling action

Double cage roller ø 400mm (tube/flat) - 160 kg/m

  • Good crumbling
  • Precised depth control

Actipack ø 560mm - 220 kg/m

  • The Kverneland Actipack roller displays its superb working qualities especially on medium to heavy soils, also in wet, stony and sticky conditions thanks to the independent skids and knives
  • The cutting discs break the larger clods whilst the adjustable knives cut the remaining clods resulting in optimal clod breadown and fine seedbed preparation

Actiring ø 540mm - 160 kg/m

  • The Actiring roller is a lighter variant of the Actipack, using the same frame structure and knife system
  • The discs have been replaced by a “V” profile ring, this is saving 60kg/m, which is of critical importance for reducing lifting requirements for mounted equipment
  • Actiring is not recommended in stony conditions

Actiflex roller ø580mm - 160 kg/m

  • The Actiflex roller has been made to create an intensive mixing under all conditions, even stony ones
  • The rings are made with spring steel to have a high resistance against stress at high speed
  • Actiflex rings are separated by skids to prevent any accumulation inside the roller
  • This roller is the ideal tool to create a nice seedbed and enhance the weeds regrowth after harvesting
Actiflex roller

test-Rear Accessories CLC pro

Rear Accessories CLC pro
Rear Accessories CLC pro
Rear Accessories CLC pro
Rear Accessories CLC pro
Rear Accessories CLC pro
Rear Accessories CLC pro
Rear Accessories CLC pro
Rear Accessories CLC pro