Fertiliser Spreader – GET READY FOR NEXT SEASON
Helpful tips and tricks to get your Fertiliser Spreader prepared to operate at its maximum capacity through the season.
ONLY ORIGINAL PARTS WILL KEEP YOUR MACHINE A KVERNELAND
Contact your local Kverneland dealer to arrange a pre-season service or health check on your Kverneland Fertiliser Spreader to ensure it delivers the best performance and maximises crop yields.
Check safe working condition of PTO shaft and guards.
Lubricate and replace any faulty parts.
Check dosing cup settings. Reset if necessary
Check all drive shafts & clutch discs.
Replace worn parts
Check oil levels in both gearboxes
– top up if required
Inspect all spreading vanes – replace if worn or damaged
Ensure all actuators and weigh cells are free of fertiliser residues
Ensure the hopper is clean and free of any blockages
THE CHECK LIST FOR ACCURATE SPREADING
The key to precise spreading is matching fertiliser quality and litre weight with the spreading charts as close as possible.
The Kverneland Fertilizer Spreader checklist helps you to ensure consistent accuracy in all field conditions.
1. Select fertiliser type.
2. Determine granule size and distribution.
FERTILISER SHAKERBOX
VN79771219
3. Determine litre weight
MEASURING CUP
VNB3405278
WEIGHT SCALE 50KG
AC353924
PROTECTION
Fertiliser can be hard on your machine and often causes aggressive corrosion.
The special Kverneland Group winter wax coating protects all metal parts and weigh cells against corrosion – and ensures your Fertiliser Spreader remains in top working condition.
WINTER COATING
A138672101
SET DISCHARGE POINT
Each disc on your Kverneland Spreader has an actuator to adjust and control the discharge point. With the setting tool and elastic rope you are in full control over each section of your spreader.
SETTING TOOL
VNB1709302
ELASTIC ROPE
VNB1754278
ORIGINAL VANE SETS
Original vanes from Kverneland are always the safe choice for your Kverneland Disc Spreader. Our vanes are designed and manufactured to a uniformly high standard, ensuring the reliability of your machine, and guaranteeing that you’ll always achieve the results as promised.
Vanes (HEAVY DUTY)
EXACTA HL / TL / TL GEOSPREAD
A138361730(12 pcs. Including lock nut)
Lift Vanes - Coated
EXACTA HL / TL / TL GEOSPREAD
A148715730(12 pcs. Including lock nut)
EXACTA TLX GEOSPREAD
A148715830(16 pcs. Including lock nut)
Vanes Standard
EXACTA-EL
A138361430(12 pcs. Including lock nut)
EXACTA-CL / CL-EW / CL GEOSPREAD
A138361530(16 pcs. Including lock nut)
EXACTA HL / TL / TL GEOSPREAD
A138361630(12 pcs. Including lock nut)
EXACTA TLX GEOSPREAD
A138613630(16 pcs. Including lock nut)
Lift Vanes
EXACTA HL / TL / TL GEOSPREAD
A148656730(12 pcs. Including lock nut)
EXACTA TLX GEOSPREAD
A148666630(16 pcs. Including lock nut)
DISTRIBUTION CENTRE METZ - SERVICE 24/7
Time is money, and we know the importance of receiving the right parts at the right time! Your Kverneland dealer is supported by a massive distribution network to supply you with exactly what you need, when you need it.
Our main distribution centre Metz warehouse is located in Thionville, France. A strategic location for distributing parts to all corners of the world. With over 70.000 parts in stock and 24/7 service, we are ready to supply you with parts – at any time!
