Kverneland Exacta TL GEOSPREAD

A Perfect Spreading Result!

With Kverneland Exacta TL GEOSPREAD you will get a perfect spreading result! The GEOSPREAD system does section control with sections of only 2 metres. With a maximum of 24 sections and the possibility to switch sections over the middle, unnecessary overlap is set to an absolute minimum. The 4 load cells and reference sensor on the Exacta TL GEOSPREAD are important features as with section control accurate weighing is essential. The total benefit of GEOSPREAD combined with speed related spreading and GEOPOINT headland management can be up to 15%. This can be achieved by saving fertiliser and better yields, because of no unnecessary overlap. This Kverneland Exacta TL GEOSPREAD spreader is ISOBUS compatible and AEF certified. You can operate the spreader in combination with the IsoMatch Tellus, IsoMatch Tellus GO or any other ISOBUS compatible tractor terminal.

The Advantages:

  • CentreFlow spreading system
  • Fully automatic weighing system with unique reference sensor
  • Unique GEOSPREAD system with two electric actuators
  • ISOBUS 11783 compatible for easy plug and play
  • Possible in combination with IsoMatch GEOCONTROL

Technical Specifications

Exacta TL GEOSPREAD (narrow) TL 1500 TL 2150 TL 2800 TL 3450
Hopper capacity (l) 1500 2150 2800 3450
Filling height (cm) 110 129 148 167
Width (cm) 275 275 275 275
Filling width (cm) 269 269 269 269
Empty weight (kg) 665 695 725 755
Spread width (m) 12 - 54* 12 - 54* 12 - 54* 12 - 54*
Output (kg/min) 10 - 320 10 - 320 10 - 320 10 - 320

 * Depending on fertiliser type and type of vanes.

Exacta TL GEOSPREAD (wide) TL 1875 TL 2550 TL 3225 TL 3900
Hopper capacity (l) 1875 2550 3225 3900
Filling height (cm) 120 139 158 177
Width (cm) 290 290 290 290
Filling width (cm) 284 284 284 284
Empty weight (kg) 705 735 765 795
Spread width (m) 12 - 54* 12 - 54* 12 - 54* 12 - 54*
Output (kg/min) 10 - 320 10 - 320 10 - 320 10 - 320

* Depending on fertiliser type and type of vanes.

KV Exacta TL GEOSPREAD 007
Video
Animation
KV Exacta TL GEOSPREAD
KV Exacta TL GEOSPREAD
KV Exacta TL GEOSPREAD
Kverneland Exacta TL GEOSPREAD
Kverneland Exacta TL GEOSPREAD
KV Exacta TL GEOSPREAD
KV Exacta TL GEOSPREAD
KV Exacta TL GEOSPREAD
Kverneland Exacta TL GEOSPREAD
Kverneland Exacta TL GEOSPREAD


GEOSPREAD System

When running IsoMatch GEOCONTROL in addition to GEOSPREAD you can set the Exacta CL and TL GEOSPREAD more accurately. The working width will be automatically adjusted to suit the overlap and coverage using a GPS positioning system. For example, when driving in a wedge or irregular shaped field, GEOSPREAD will start to decrease the working width step by step. GEOSPREAD is using the section control function of the IsoMatch GEOCONTROL software which is in the IsoMatch Tellus or IsoMatch Tellus GO terminal. The spreader working width is divided into a minimum of 2 metre sections (max. 24 sections on TL GEOSPREAD and max. 14 sections on CL GEOSPREAD). Not only the spreading width is adjusted, the application rate (kg/min) is also adjusted automatically to match the revised spreading width. This unique combination of working width and application rate adjustment makes the GEOSPREAD system extremely accurate, with minimum influence on the spread pattern coefficient of variation.

The Advantages:

  • Quick and accurate spreading, due to the actuators being directly connected to the discharge point. No linkages.
  • Stable disc RPM in combination with discharge point adjustment maintains the spreading pattern (coefficient of variation)
  • Easy operation; no need to step off the tractor to adjust the working width
  • 100% ISOBUS compatible for easy operation 
  • Automatic start/stop with GPS on headlands possible
KV Exacta TL GEOSPREAD 003
GEOSPREAD System
GEOSPREAD System
GEOSPREAD System
GEOSPREAD System
GEOSPREAD System
GEOSPREAD System
Accurate spreading in irregular shaped fields
Accurate spreading in irregular shaped fields
Accurate spreading in irregular shaped fields

CentreFlow Spreading System

  • No impact, no fragmentation, no dust: Central release point, smooth acceleration and centrifugal force accelerates fertiliser up to disc speed before it reaches the vane.
  • Accurate spreading pattern: A double overlap spreading pattern gives unrivalled accuracy. The 8 vanes per discs are ensuring a continous flow of fertiliser to the field. This is important for high capacity spreading and forward speed.
  • Minimal wind influence, maximum tolerance: Flat discs and a horizontal flow of fertiliser give a symmetrical spreading pattern.
  • Consistent spreading pattern: Eight vanes per disc, eight sectors per revolution give an equal distribution. Double overlap spreading pattern.
  • Guaranteed accuracy on slopes: guaranteed accuracy on slopes. The fertiliser always contacts the vanes at the same point, also on slopes and travels the complete length of the vane.
KV_exacta_0002.jpg
8 vanes per disc
8 vanes per disc
8 vanes per disc
Optimal distribution
Optimal distribution
Optimal distribution
CentreFlow Spreading System
CentreFlow Spreading System
CentreFlow principle
CentreFlow principle
CentreFlow principle

Weighing System

  • Continuous dynamic "online - calibration" with high frequency communication signal.
  • Kvernelands unique reference sensor technology: all negative influences are automatically corrected and eliminated, ensuring utmost spreading accuracy even on hill sides. The Kverneland reference sensor gives you absolute accuracy, because every kilo counts!
  • Load cells in combination with the unique reference sensor:
    - Auto calibrating and continuous weighing system
    - Automatic correction on slopes
    - Automatic correction of shocks, even on rough terrain
    - Automatic speed related dosing system
    - No calibration test needed
  • Highest accuracy in all conditions: even spreading quality guaranteed! Save costs and increase quality! 
KV_exacta_0053.jpg
Weighing system Exacta TL
Weighing system Exacta TL
Weighing system Exacta TL
Weigh cell
Weigh cell
Weigh cell
Actuators to open and close
Actuators to open and close
Actuators to open and close
Reference sensor CL EW
Reference sensor CL EW
Reference sensor CL EW

EasySet: Easy Setting and Adjustment

  • The compact EasySet 'dashboard' gives you considerably simplified accurate setting and adjustment of applicaton rates. Two hydraulically operated metering plates, each with three discharge openings ensure an equal fertiliser flow from the hopper to the spreading discs.
  • The development department of Kvernelands spreader R&D team has its own spreader competence centre in order to allow continuous testing throughout the year. All test are carried out according to the strictest international standards and quality requirements.
  • The key to accurate spreading is matching fertiliser quality and litre weight with the spreading charts as close as possible. The Kverneland Exacta checklist helps you to ensure consistent accuracy in all field conditions
    1. Select fertiliser type
    2. Determine granule size and distribution
    3. Determine litre weight
KV_exacta_210
Granule size box
Granule size box
Granule size box
Spreader Competence Centre
Spreader Competence Centre
Spreader Competence Centre
Access to the spreading charts via internet or mobile!
Access to the spreading charts via internet or mobile!
Access to the spreading charts via internet or mobile!
Download now the Spreading Charts App!
Download now the Spreading Charts App!
Download now the Spreading Charts App!

Border Spreading

  • Kverneland offers the ExactLine system or manual/hydraulic border spreading plate for border spreading. The ExactLine can be accurately set for all types of fertiliser and for all working widths. Operation is easy, no need to leave the tractor seat. For the HL, TL and TLX models the ExactLine can even be fitted on the left and right hand side of the spreader.
  • With one-side boundary spreading the tractor is driven approximately 2 metres from the field border.
  • With boundary track spreading the tractor is driving in the first tramline and is spreading to the border. The distance to the border is the half of the working width.
  • The Border Spreading Indicator (BSI), indicates which border spreading device is active.
KV_exacta_206
Border spreading using the ExactLine system
Border spreading using the ExactLine system
Border spreading using the ExactLine system
Hydraulic border spreading plate (not for EL)
Hydraulic border spreading plate (not for EL)
Hydraulic border spreading plate (not for EL)
Boundary track spreading
Boundary track spreading
Boundary track spreading
One side boundary spreading
One side boundary spreading
One side boundary spreading

ISOBUS Control

  • ISOBUS intelligence: Standard on Our Weighing Spreaders 
    You are ensured of the ISOBUS compatibiliy from tractor to the spreader and spreader to tractor, meaning that all data collection from your spreader is centralised and can be easily transferred to your (tractor)terminal in the tractor cabin. Easy plug and play!
  • IsoMatch Tellus GO:
    The IsoMatch Tellus GO is a Universal ISOBUS Terminal. This multifunctional one-screen terminal has been developed for fast and simple control of any ISOBUS implement, giving the farmer a 'custom made' experience as it suits all needs for simple and efficient handling of farming machinery and tasks. 
  • IsoMatch Tellus terminal:
    The IsoMatch Tellus is the first Universal Terminal with the capability to view and operate 2 different ISOBUS interfaces at once. This allows for example direct control of 2 implements at the same time for continuous observation of a camera view, without switching screen.
    • Large 12,1" colour touch-screen
    • Intuitive operation
    • Basic DOC registration program to save operational information directly to USB
    • Four USB slots for easy data exchange, wireless USB stick or USB to serial cable for additional sensors
    • Build in PDF reader
    • RS232 connection for GPS receivers or sensors
    • Internet connection via a wireless USB stick or router
    • Integrated web browser

For further information regarding our iM FARMING concept go to http://www.kvernelandgroup.com/Brands-and-Products/iM-FARMING.

KV_exacta_0088_test.jpg
ISOBUS Intelligence
ISOBUS Intelligence
ISOBUS Intelligence
IsoMatch Tellus GO
IsoMatch Tellus GO
IsoMatch Tellus GO
IsoMatch Tellus with IsoMatch GEOcontrol
IsoMatch Tellus with IsoMatch GEOcontrol
IsoMatch Tellus with IsoMatch GEOcontrol
Serial port to connect external sources
Serial port to connect external sources
Serial port to connect external sources

AutosetApp

With the AutosetApp you have always the most up to date settings for your weighing spreader available. The AutosetApp is an App (software application) available on the IsoMatch Tellus or IsoMatch Tellus GO terminal. The AutosetApp is standard integrated into the IsoMatch Tellus GEOCONTROL software. This App connects the terminal directly with the GEOSPREAD weighing spreader and will automatically adjust the spreader according to the settings entered into the App. The AutosetApp will also work in combination with the CL-EW and TL, with the exception being for those spreaders the discharge point (letter setting) still needs to be adjusted manually on the spreader itself.

The Kverneland fertiliser spreader database with the most up to date spreading charts is always available online. The AutosetApp can connect to the fertiliser spreading database in two different ways. You can connect it to the online database via the IsoMatch Wireless WIFI USB adapter or download the most actual database from the website www.kvernelandspreadingcharts.com on an USB stick and upload the database directly into the IsoMatch Tellus or IsoMatch Tellus GO terminal.

KV AutosetApp 006
Download actual database
Download actual database
Download actual database
Enter working width, application rate, speed
Enter working width, application rate, speed
Enter working width, application rate, speed
Select the fertiliser
Select the fertiliser
Select the fertiliser
Forward the settings entered to the spreader
Forward the settings entered to the spreader
Forward the settings entered to the spreader

Standard and Optional Equipment

  • The Exacta HL/TL(X) spreaders are also available mounted on a trailer frame.
  • Central Hydraulic Drive as option available for the HL/TL(GEOSPREAD).
  • Easy to assemble aluminium hopper extensions are available to increase hopper capacity.
  • An easy to fold in and out hopper cover is as option available. Simple to fit!
  • Left/right shut off valve for spreading at half working widths is optional available.
  • To ensure a consistent flow when spreading low quantities, the CentreFlow system is equipped with a fine application kit. Ideal for spreading low quantities, seeds and slug pellets.
  • Delta shaped heavy duty grids are standard equipment of the Exacta HL/TL(X) spreader.
  • Centre gear box with 2 input shafts for high and low disc speed settings is standard equipment of the HL/TL(X) spreader.
  • Hopper emptying kit is optional available to easy get the last fertiliser out of your hopper.
  • Easy calibration is done with the optional calibration container.
  • Long lifetime LED lighting set, is optional for the EL, CL and CL-EW. For the HL, TL and TL(X) GEOSPREAD spreader is this standard equipment.
  • The mud guards (option) protect the spreading disc against mud, water etc.
KV_exacta_100
Hydraulic Drive
Hydraulic Drive
Hydraulic Drive
Long lift time LED lighting set
Long lift time LED lighting set
Long lift time LED lighting set
Hopper emptying kit
Hopper emptying kit
Hopper emptying kit
Mud guards (option for HL/TL/TL GEOSPREAD)
Mud guards (option for HL/TL/TL GEOSPREAD)
Mud guards (option for HL/TL/TL GEOSPREAD)

Do you require more info?