Kverneland Foldable Power Harrow F30

For tractors up to 300 hp

The new Kverneland foldable power harrow NG-H 101 F30 with working widths from 4.0 to 6.0m completes the product range of Kverneland power harrows. Designed to meet the needs of large-scale harrowing, the new Kverneland F30 offers all features developed in over 40 years experiences with PTO driven equipment.

The Kverneland F30 is based on an innovative trough design that does not require any lateral frame. This saves weight and gives the machine a clear design. The new Kverneland F30 works with 4 rotors per metre of trough. Optimum tillage performance and low power consumption is achieved by the closer inter-tine carrier distances (25cm). In addition the helical tines configuration combined with 95mm of rotor clearance allow perfect soil levelling and preparation.

Advantages

  1. Efficient performance with a lower weight
  2. Minimum power requirements and reduced fuel consumption
  3. Great versatility to carry seeding equipment
  4. Wide offer of rear rollers
Model Working-/Transport width (m) No. of rotors Weight with packer roller (kg)
NG-H 101 F30 4.00m 4.00/2.50 16 2550
NG-H 101 F30 4.50m 4.50/2.50 18 2950
NG-H 101 F30 5.00m 5.00/2.50 20 3250
NG-H 101 F30 6.00m 6.00/2.50 24 3650
Highlights

Heavy-duty trough design F30

The innovative trough design without any lateral frame

Clear design saving weight

High clearance of 95mm between the tine holder and trough bottom

Double conical bearings and rotor shaft of 50mm diameter in combination with removable tine holders and Quick-Fit tines guarantee high reliability and very low maintenance requirements

"Pro-fit" active tines

  • The “Pro-Fit” Active tines ensure optimum penetration in hard soil.
  • The tine, due to its shape, pulls itself into the ground. This gives a constant working depth and also prevents the machine from lifting out of the ground in hard dry soil conditions.
  • It creates additional recompaction at the packer roller.
  • The “Pro-fit” active tine lifts the material and pushes it in front of the power harrow. This gives an optimum levelling effect even in tractor tracks.
  • In mulch conditions the active tines can work directly into stubble and hard soil.
  • The special shape of the tines keeps residues on the surface and this gives a big advantage against erosion.

Helical tine positioning in order to prevent damage caused by stones and to ensure even levelling. This reduces also peak loads on the driveline and results in smoother running and less fuel consumption.

Kverneland quick-fit or optional carbide tines

The quick-fit tines for easy replacement and carbide tines for a longer lifetime and minimum wearing are available as an option.

  • Kverneland Quick-fit tines are simply fixed to the tine holder by a pin and a clip. All tines can be quickly replaced without any tools
  • Down time can be minimised by optional carbide layered Quick-Fit tines. These tines ensure a long lifetime and minimum wearing even in tough and abrasive soils.

Kverneland Packer Rollers

The Kverneland range of rollers offers the right choice for all various soil conditions and crop establishment systems.  

  • Tooth Packer Roller
    For NG-M 101/NG-S101: dia. 500 + 585mm 
    For H series: dia. 575mm
    suitable for medium to heavy soil, most versatile roller - especially as part of heavy power harrow/seed drill combination
  • Flexline Roller dia. 585mm: light to medium-heavy soils - especially under varying soil conditions, smooth roller surface - no blocking when used in mulch conditions
  • Cracker Roller dia. 550mm: medium to the heaviest soil, real stripe-wise reconsolidation (12.5cm) in front of seed coulters - only 50% of the soil surface is rolled
  • Cage Roller dia. 550mm: light to medium soil and dry working conditions, basic variant: mainly for depth control of the power harrow
  • Actipack Roller dia. 560mm: medium to heavy soil, scraper between the discs, optional knives for intensive crumbling effect

Do you require more info?