Kverneland Subsoiler DTX

One pass preparation – versatile and cost-effective

Kverneland DTX

As a result of growing farms and shorter weather  periods, time has become a valuable factor. Therefore, the DTX combines different operations in one pass to save time.

Designed as a mounted one-pass stubble incorporator/soil loosener for tractors in the 200-360hp range, the DTX is extremely versatile. It can be used for first entry with non-inversion tillage or to knock down ploughing whilst loosening down to 40cm. It is also ideally suited to establish oilseed rape straight into stubble as it leaves a very levelled, fine and consolidated seedbed. The DTX also offers very good trash clearance. The front tines are staggered and the rear discs allow a full cut and mix from 2 to 10cm deep.

The Kverneland DTX combines the tines (Pro-Lift or LD) with the proven disc section of the short disc harrow Qualidisc Farmer (Ø 520mm). Soil can be loosened with the Pro-Lift or LD tines down to 40cm while the top soil layer up to 10cm is incorporated with the disc sections. Tines and disc segment as well as the roller DD600 are connected in a high quality frame box which allows the operation even in heavy conditions. The DTX is equipped with side deflectors which are well-known from the Qualidisc range. This ensure perfect levelling in all types of conditions

The Advantages:

  • Long durability
  • Low power requirement
  • Improved trash flow
  • Deep loosening
  • Respecting the soil structure
Model  DTX 300 SB (Shearbolt) DTX 300 AR (Auto-reset)
Working width (m) 3.00 3.00
Frame size (mm) 180 x 180 x 10 180 x 180 x 10
No of tines  5 5
Tine spacing (cm) 60 60
Average power requirement (HP) 200 - 300 200 - 300
Max. power requirement (HP) 350 350
Weight (kg) 2,750 2,970

Do you require more info?