Kverneland 3336 MT Vario

Race Car Technology for Mower Conditioners

New generation of mounted mower conditioners from Kverneland with ground breaking QuattroLink suspension concept. The mowing unit is suspended by four suspension arms that allow the mowing unit to float independently float over the field, and adjust accurately to ground contours.

The new QuattroLink mower has been designed for even more productivity and to handle tougher conditions than ever. With its´ accurate ground following ability and highly flexible working range QuattroLink provides supreme capacity.Ground pressure is easily adjusted from the tractor seat, hydraulically and with an easy to read pressure scale on the mower for clear guidance. The suspension provides NonStop BreakBack protection across the full working width, with no limiting factor on the left hand side of the mower, giving the driver true peace of mind during operation.

 The Advantages

  • 3.60m working width.
  • New QuattroLink racecar suspension concept.
  • Flexible suspension – 700mm working range, 400mm up and 300mm down.
  • NonStop BreakBack protection across full working width.
  • Vario version with hydraulic adjustment of overlap on the go.
  • Ground pressure remains the same, even when overlap is changed.
  • Minimum 500mm ground clearance during headland turns.
  • Integrated parking feet for vertical storage.
  • Dual adjustment of conditioner hood - both front and rear end can be adjusted
  • Vertical Transport Solution.

Technical Specifcations:

  Working Width No. of Discs Conditioner
3336 MT Vario 3.60m 9 round discs SemiSwing steel tines
KV_3336MTVARIO_007
Video
Animation
Kverneland 3336 MT Vario - Mower conditioner with hydraulic adjustable working width to set optimum overlap with front mower.
Kverneland 3336 MT Vario - Mower conditioner with hydraulic adjustable working width to set optimum overlap with front mower.
Kverneland 3336 MT Vario - Mower conditioner with hydraulic adjustable working width to set optimum overlap with front mower.
Excellent cutting performance - 3 point mounted mower conditioner with 3.6m working width.
Excellent cutting performance - 3 point mounted mower conditioner with 3.6m working width.
Excellent cutting performance - 3 point mounted mower conditioner with 3.6m working width.
Kverneland 3336 MT Vario
Kverneland 3336 MT Vario
Kverneland 3336 MT Vario
Mower Conditioner with vertical transport position - excellent stability during high speed transport.
Mower Conditioner with vertical transport position - excellent stability during high speed transport.
Mower Conditioner with vertical transport position - excellent stability during high speed transport.


QuattroLink Suspension

Racecar Technology Applied for Mower Conditioners

What makes the QuattroLink suspension unique? The mowing unit is pulled by four suspension arms fitted onto a fixed carrying arm that allows the mowing unit to float independently over the field, adjusting highly accurately and instantly to any changes in ground contours.

No Compromises on Flexibility

The mowing pattern is extremely flexible with a vertical working range of 700mm up and down and a transverse working range of 30°. The 4 arm suspension concept ensures constant ground pressure during working operations.

 

How You Will Benefit from QuattroLink

Like a race car you want better tracking, ability to go at faster speed and adjust instantly to changing field conditions when operating your mower conditioner. These are the main benefits you will experience when running the kverneland 3300 series and 53100 MT Vario. The four suspension arms provide the mowing unit with an exceptional flexibility in adapting instantly to demanding ground contours inviting for higher speed and more productivity.

KV_53100MT_023
Adaptation range of 400mm upwards and 300mm downwards
Adaptation range of 400mm upwards and 300mm downwards
Adaptation range of 400mm upwards and 300mm downwards
Transverse working range of 30°
Transverse working range of 30°
Transverse working range of 30°

Full Width BreakBack

Our NonStop BreakBack system just got even better. With the new QuattroLink suspension this system now offers protection across the full working width of the mower, including the part closest to the tractor. There are no limiting factors on the inside part of the mower, giving the driver true peace of mind. When hitting an obstacle in the field, the mowing unit will instantly move backwards and up, and then return to the original position.

kvern3336IMG_02650270breakback

Vario - Suspension Arm

Hydraulic Adjustment of Overlap

Kverneland 3336 MT Vario and 53100 MT Vario are fitted with hydraulic SideShift integrated into the carrying arm allowing each mowing units to move 400mm. To easily compensate for changing field conditions, the adjustable overlap is designed as a telescopic arm, directly into the suspension.

Ground Pressure Remains Constant

During mowing operation the carrying arm always remains even to the ground, giving the mowing unit the freedom to instantly compensate and float across uneven ground contours. The true benefit of the suspension concept is that even though overlap is changed, the chosen ground pressure remains the same.

KV_3336MT_001
Easy setting of correct overlap
Easy setting of correct overlap
Easy setting of correct overlap

Efficient Headland Management 3300

The Kverneland 3300 series provides generous clearance across the complete cutterbar, including the inside area. When lifting the mower on headlands, the mowing unit is raised and the carrying arm is tilted to a 10° angle. This provides the Kverneland 3000 series with a level ground clearance of minimum 500mm across the full working width. When lowing the mowing unit the carrying arm is lowered evenly without one side touching the ground before the rest of the mower, avoiding unnecessary stress and wear on the mower

KV_3336MTVARIO_005
Ample Ground Clearance
Ample Ground Clearance
Ample Ground Clearance
Kverneland 3332 MT - efficient headland turning
Kverneland 3332 MT - efficient headland turning
Kverneland 3332 MT - efficient headland turning
Kverneland 3336 MT Vario - efficient headland turning
Kverneland 3336 MT Vario - efficient headland turning
Kverneland 3336 MT Vario - efficient headland turning
Kverneland 3332 MT - efficient headland turning
Kverneland 3332 MT - efficient headland turning
Kverneland 3332 MT - efficient headland turning

Transport and Vertical Parking

Vertical Transport Position

For transport the mower folds into a compact position well behind the tractor. The folding design ensures that the weight is distributed evenly, with the weight of the mower close to the tractor. Transport height is well below 4.00m.

Parking, Safe and Sure-Footed

With the integrated parking device, storage of the machine is made easy and convenient, requiring a minimum of space during winter storage. The mower is firmly parked on strong and stable parking foot, bringing total height below 4.00m.

KV 5087 MN_025
Integrated parking device
Integrated parking device
Integrated parking device
Strong and sturdy parking feet
Strong and sturdy parking feet
Strong and sturdy parking feet

SemiSwing Conditioner

Even More Efficient Conditioning

The new conditioner plate can be adjusted at both front and rear ends to customize the conditioner to crop intensity. The front end is adjusted separately to suit the crop intensity, even for massive crop, to avoid any blockages. Rear end is adjusted to ensure smooth and efficient crop flow into swaths or wide wide spreading.

Steel Tine Conditioner

Utilizing centrifugal force is what makes the Kverneland SemiSwing conditioner stand out among other conditioning systems.  It offers an aggressive conditioning effect while still offering excellent tine protection and virtually no wear and tear.  During operation tines will stay in a fixed position, providing full conditioning with minimum wear.

KvT_4300_0008.jpg
Conditioner plate can be adjusted at front and rear end.
Conditioner plate can be adjusted at front and rear end.
Conditioner plate can be adjusted at front and rear end.

Spreading and Swathing

Swath Plates Automatically Expand

Swath plates automatically expand when being slided inwards to support efficient and accurate swathing.

Easy Change-Over for Widespreading

Changing from swathing to widespreading is virtually a one minute job. The swath plates are easily slided to the side and the FlipOver widespreading vanes are turned 180°. No tools are required.

KV_53100MT_027
FlipOver wide spreading
FlipOver wide spreading
FlipOver wide spreading
Easy setting of swath plates
Easy setting of swath plates
Easy setting of swath plates
Easy setting of swath plates
Easy setting of swath plates
Easy setting of swath plates

Dual Adjusment of Conditioner Hood

Even More Efficient Conditioning

The new conditioner plate can be adjusted at both front and rear ends to customise the conditioner to crop intensity.

The front end (1) is adjusted separately to suit the crop intensity, even for massive crop, to avoid any blockages.

Rear end (2) is adjusted to ensure smooth and efficient crop flow into swaths or widespreading.

KV_53100MT_024
Dual Adjusment of Conditioner Hood
Dual Adjusment of Conditioner Hood
Dual Adjusment of Conditioner Hood
Dual Adjusment of Conditioner Hood
Dual Adjusment of Conditioner Hood
Dual Adjusment of Conditioner Hood

Do you require more info?