TrailedLine Classic Duo

Hopper capacities from 12m³ to 24m³

The Kverneland Siloking Classic Duo with 2 turbo augers addresses the workload of larger farms and farms with narrow and low barn passages.

With its 2 high-performance turbo augers, the Classic Duo offers enormous capacities, also with longer transport distances and big herds. The 2-speed gearbox as standard equipment and the appropriate hopper geometry offer smooth operation and optimal mixing results.

Technical Specifications:

Model Capacity (m³) Length (m) Width (m) Height (m)
Duo 12 12 6 1.96 2.62
Duo 13 13 6.2 2.06 2.64
Duo 14 14 6.35 2.06 2.76
Duo 14-T 14 6.55 2.26 2.45
Duo 16 16 6.55 2.26 2.7
Duo 18 18 6.6 2.26 2.9
Duo 18-T 18 6.85 2.42 2.58
Duo 20 20 6.9 2.42 2.87
Duo 22 22 6.94 2.42 3.02
Duo 24 22      
Highlights

Two Turbo Augers

  • The Turbo Auger height is adjusted to the hopper height providing perfect auger-hopper ratio for accurate and quick mix.
  • Turbo Auger with slow revolutions provide a gentle mix with very low power consumption.
  • Adjustable Turbo Auger speed.
  • The conical hopper shape optimizes feed flow back from top to hopper bottom, providing fast processing and reduced power consumption.
  • Robust load cells ensure accurate weighing - only what is in the mixing hopper is weighed.
  • Multiple adjustable hard-coated XS knives.
  • For longer durability Siloking Kverneland has developed SILONOX lining as an option for the mixing augers and hopper walls, where most wearing occurs.

Gearbox and Driveline

  • Standard with planetary gearbox with helical bevel gear drive, the heavy duty transmission is designed for efficiency and durability, even when operating at full load.
  • The relationship between gearbox and auger is carefully balanced for the optimum mixing result – high mix quality in the shortest possible time.
  • All elements of the transmission – auger connection, planetary gearbox, 2-speed gearbox & drive-line – match the requirements of excellent mix results with minimum down-time.

Weighing System

  • Precise control of ration components is needed when preparing feed rations.
  • Siloking Kverneland vertical mixers are fitted with a highly accurate weighing system as standard.
  • This means that exact quantities of materials can be loaded - essential for the preparation of accurate feed rations.
  • Featuring multiple weigh bars mounted between hopper and separate chassis, this quality system offers very accurate control of even small components during the loading of the machine.
  • Clearly visible some distance from the machine, the simple scale is standard with a fully programmable system as an option.

Discharge Options

  • The vertical mixer range can be adapted to suit a wide variety of barns or feed troughs.
  • From feeding onto the floor or over high feed barriers, there is a discharge solution available.
  • If needed a conveyor option can be fitted to transport material away from the door.
  • Simple discharge doors - single or multiple per machine.
  • Cross conveyor for discharge to either side of the machine - can be positioned at the front or rear of the machine.
  • Hydraulically driven conveyors, fitted onto cross conveyor or direct onto discharge door, suitable for transporting material or into troughs.
  • TwinLift conveyor - available for Compact 10-14 and Duo 14T-26. Can disharge in any position.

Straw Blower

  • The straw blower option is available on models Compact 10-T–14m³, Duo 16-18m³, Duo Avant 14-20 and Duo New Generation.
  • The straw blower option offers a precise discharge of the straw inside the animal buildings.
  • The 1.55m diameter front mounted flywheel comes from the Kverneland 850 series Bale Choppers – known for its´ robust design and quality distribution of straw.
  • This system is mechanically driven from the tractor and located direct on the front of the machine, without the need for feed drums or conveyors.
  • Drive to the flywheel is independent of the drive to the augers, supporting each phase of the process – loading, cutting, mixing and discharge.
  • Straw is distributed by the side chute, offering straw blow up to 20m 

Two Speed Gearbox

  • Standard with heavy-duty planetary gear drive to auger and 2-speed gearbox, allowing accurate control of auger speed during cutting, mixing and feed-out.
  • 2-speed gearbox can be changed manually or via hydraulic control (option).

Siloking Kverneland Wireless

  • All information available at a glance.
  • Weighing system controlled from the tractor cabin.
  • Wireless - no disturbance of hydraulic functions.
  • All information is stored centrally in the machine box.
  • Weight information is always available - even in the silo.
  • Control your weighing system from the loading vehicle.
  • Feeding Management Software gives you full control over loading precision and feed consumption.
  • The SWT package includes adding weighing system.
  • The SWE Package combines programmable weighing system with electro-hydraulic control.

Do you require more info?